The Cambria Hotel is a 13 story luxury hotel located in South Boston. All switchgear (including equipment/elevator disconnects) and light fixtures were coordinated with sizes and clearances specified in cutsheets/per code. Light fixtures outside of grid ceilings were laid out on the slab utilizing the file exported from the Revit model onto the Trimble Total Station and and lasered up to the deck above to ensure fixtures were installed in coordinated locations. All power, FA, TD, and incoming utility conduits were coordinated throughout the building with risers in the electrical and Teledata closets on each floor. All conduit/MI cable/lightning protection and hangers, slab openings below switchgear and underground stub-ups were coordinated with sleeves and threaded rod anchors were laid out/installed with Trimble prior to the pour of the post tension slab and equipment pads laid out post pour. All horizontal penetrations through the core walls surrounding the stairwells/elevator lobbies were installed in the coordinated locations shown on the Horizontal Penetration Shop Drawings provided to the EC as part of the BIM services. The Revit file was sent to Standard Electric to have all conduits pre-bent using the Greenlee 3D Auto Bender and installed per Conduit Shop Drawings. As-Builts for all levels from underground to rooftop were provided to EC in CAD format. With Consigli as the GC coordination started in 2016 and opened 9/30/2019.